Beitian M10 BE-122 GPS Module UAV PX4 PIX32 GNSS GPS Antenna Receiver Module

Beitian M10 BE-122 GPS Module UAV PX4 PIX32 GNSS GPS Antenna Receiver Module

 
Parameters:

1/ Chip characteristics
- Chip: M10050
- Frequency: GPS L1 C/A, QZSS L1 C/A/S,BDS B1I/B1C, Galileo E1B/C,SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN
- Operation mode: GPS pBDS pGALILEO pSBAS pQZSS


2/ Sensitivity:
- Track: -166dBm
- Re-arrest: -160dbm
- Cold start: -148dBm
- Hot Start: -160dbm

3/ Precision:
- Horizontal Accuracy: 1.5m CEP 2D RMS SBAS Auxiliary (For Open Sky), (252Q 1.5m CEP)
- Speed accuracy: 0.05 m/s
- Dynamic inclination accuracy: 0.3 degrees
- 1PPS Time Accuracy: RMS 30ns/99% 60ns

4/ Start time:
- Cold start: 27s
- Hot Start: 1s
- Assisted start: 1s

5/ Output data:
- Transmission rate: 4800bps921600bps,default38400bps (252Q default115200bps)
- Output level: Ttl-level
- Initial protocol: NMEA,UBX
- NMEA sentences: RMC,VTG,GGA,GSA,GSV,GLL
- Update Frequency: 0.25Hz-18Hz, 1Hz by default (252Q  10Hz by default)
- Second pulse: Configurable from 0.25Hz to 10 MHz, default period is 1s, and high level lasts 100ms

6/ Work restrictions:
- High: 80,000 million
- Speed:<500 m/s
- Gravitational acceleration:<4g

7/ Energy consumption:
- Voltage:DC 3.6V-5.5V, typical: 5.0V
- Current:Normal 50mA/5.0V(252Q 15mA/5.0V)

8/ Environment:
- Operating temperature:-40 ° c ~ + 85 ° c
- Storage temperature:-40 ° c ~ + 105 ° c

9/ LED: Built-in LED
- TX LED: blue. Data output, TX flashes
- PPS LED: red. PPS does not light up when GPS is not fixed, flashes after repair