Keo lock GY340

GY340 glue

 Keo lock óc sử dụng ở nhiệt độ thực tế -55--150 độ

 Nhiệt độ môi trường xung quanh là trên 23 độ, lắp ráp sau 4-6 giờ đưa vào sử dụng.

1. For threaded fastening seal, mechanical manufacturing special Low resolve screws, nuts loosening problems. Practical degree temperature -55--150

2. Install and then speak bearing bearing or shaft

3. The rotor gear mounted on a shaft

4. Fixture time 5 - 15 minutes at room temperature

5. The ambient temperature is above 23 degrees, the assembly after 4-6 hours put into use. 23 degrees or less, 6-4 hours after

6. The assembly suitable for detecting intensity after 24 hours, again in the middle of misuse